PERCORSO X

 

Application

Perimeter, Roadway, parking, compound, garden & etc Architectural and landscape.

Features

  • High pressure die cast aluminium alloy housing.
  • Corrosion resistant.
  • Finished with polyester powder paint.
  • Tool free maintenance
  • Easy access from the top for maintenance
  • Easy replacement of the entire LED module and electronic system by removing the top cover. “Plug and Play” system.
  • Standard colour grey.
  • Anti-aging silicone rubber gasket.
  • Clear tempered glass protector.
  • Adjustable mounting spigot for tilting and mounting
  • Flexibility on pole top and side entry
  • Double Clip on closure.
  • Operating temperature (Ta) -25Grad – 50Grad
  • Salt spray tested (ISO 9227:2012)
  • Anti vibration up to 5G
  • Dimming and smart lighting system available upon request.

Characteristic

Light source: High Power LED
Power correction factor: > 0.9
Insulation: Class 1   3
Compliance: IEC 60598-1, IEC 60598-2-3

IEC 62722
Ingress Protection (IP): IP66
Protection against surge (SPD): 10KA – 20KA
Colour rendering (CRI): >=70
Colour temperature (CCT): 3000K – 6000K
Other CCT&CRI available upon request  
Weight: 5.7kg – 15kg

Specification

Type Percorso X series
Light source Integral LED-module
Wattage 50W – 240W
Nominal efficacy 120 – 135 Im/W
Color Temperature (CCT) 3000K – 6000K
Color rendering Index (CRI) >=70 Other CRI available upon request (>=80, >=90)
Useful life 50,000 hours – Base on the light source
Operating temperature range (Ta) -25 Grad – 50 Grad
Driver Built-in electronic system
Main voltage 100 – 277V / 50 – 60Hz
Options Dimming system

Photocell

Nema socket (7 pin)
Optical lens photometry T2A, T3A, T4A, T3, T4, T5, T12, T13, T14
  *Refer to the Lens application page
Material Housing: High pressure die-cast aluminium alloy

Protector:Clear tempered flat glass

Finishing: Polyster Powder paint
Color Grey

Other RAL colors available on request
Maintenance Possibility to open with screw to replace driver and LED module. Easy maintenance.
Installation Post top: 60 mm

Side entry: 60mm

Recommended mounting height: 6m – 15m

Standard tilt angle post top: 0, -5Grad and -10Grad

Adjustable tilt angle 0, -5Grad and -10Grad

Ordering Code Dimmensions

Code Wattage Leds Nominal Flux a b c d e f
PEX06040 60W 32 7800 720 610 360 115 138 60
PEX09040 90W 48 11700 720 610 360 115 138 60
PEX12040 120W 48 15600 760 660 360 115 138 60
PEX15040 150W 64 19500 760 660 380 115 138 60
PEX18040 180W 80 23400 910 810 380 120 143 60
PEX20040 200W 96 26000 910 810 380 120 143 60
PEX24040 240W 112 31200 910 810 380 120 143 60

* The above ordering code is base on CCT-4000K